Voultar's SNES THS7374 RGB bypass kit is designed to output properly attenuated RGB coming directly from the 1CHIP's analog outputs.
Features and Info:
My board uses the THS7374, this offers a sharper image compared to similar products as there is no "forced" low-pass filtering to soften the image output.
Designed to work with all 1CHIP and SNES Mini variants (please select the system you'll be installing the kit in).
On-board passive Luma & Chroma circuitry that restores S-Video output for the SNES Mini.
RGB amplitude has been attenuated to proper video standards, .7vPP. No ringing, ghosting or washed out (bright) picture output.
C-Sync restoration circuitry for SNES Mini's and the 1CHIP revisions that don't have C-Sync Output.
C-Sync signal can be converted between TTL and 75-ohm levels by shorting a jumper found on the circuit. No more RGB cable modding to make C-Sync properly work with your; Television, monitor or scaler!
The THS7374 low-pass filter can be enabled/disabled via solder-strap. The filter is OFF by default when the kits ships.
I recommend bridging the TTL jumper and using a C-SYNC SCART cable with a 330Ω to 470Ω resistor on the composite sync line.
- Fully Assembled RGB Kit
- (Optional) SNES Mini stripped/pre-tinned wiring
- (Optional) 1CHIP RGB stripped/pre-tinned wiring
- (Optional) C11 capacitor replacement for all 1CHIP and Mini systems
Instructions can be found on RetroRGB's site here!
My SNES RGB 1CHIP/Mini bypass kit is only compatible with SNES MINI and SNES 1CHIP revisions.
Voultar's N64RGB kit is provided as is without any guarantees or warranty. In association with the product, the great Voultar makes no warranties of any kind, either expressed or implied, including but not limited to warranties of merchantability, operational failure and/or damage as a result of end-user installation. Use of the product by a user is at the user’s risk.
SNES 1CHIP/Mini RGB Bypass Kit
- Product Code: SNESTHS7374KIT
- Availability: Out Of Stock
- Ex Tax: $29.00